Vision (2x25W) Digital Amplifier

Reference Number: TC3-AMP

0
(0)

Product Features

  • Extremely small 2 x 25 w (RMS) at 8 ohms Digital Amp
  • 2 x Stereo inputs (Input 1 duplicated on front and rear)
  • IR Remote control included
£131.53 ex. VAT
280 In Stock
Product Description

By using latest low-impedance digital amplifier chip technology the new Techconnect Amp module outputs a massive 2 x 25 watts RMS (at 8 ohms) but fits into the space of a Techconnect module. Two Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This 'half-normalled' input disconnects the rear terminal while in use. Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary. Don't let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers). By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on - for example in hotel guest rooms. A simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input. A remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision's spare remote controls have tone buttons but they do not work with this product. A robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required. Speaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect. Ideal when you don't have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft. Can be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms. Included is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules.

Product Specification
General
Warranty 3 Year
Barcode 3446595000006
Interfaces/Ports
Input Connector(s) 2 x Stereo inputs (Input 1 duplicated on front and rear)
N
Input Impedance 8
Frequency Response Low (Hz) 80
Voltage (V) 100 to 240
Product Code (OR) 1408578
Signal to Noise Ratio (dB) 98
Power Adaptor Type External
Frequency Response High (Hz) 22,000
Total Harmonic Distortion (THD) (%) 1% (20Hz to 22Khz)
Weight (kg) 0.47
Standards RoHS, WEEE, CE/EMC, RCM, FCC
Height (cm) 6.4
Product Type Amplifier
Electrical Frequency 50 to 60
PartNo TC3-AMP
In The Box Vision Techconnect (2x25W) Digital Amplifier • 1 x Single-gang Backbox • 1 x Single-gang Surround • 2 x 150mm (5.9 inch) input cables • 2 x Unshielded Speaker cable 5m (16.4 ft) long • 1 x Remote Control with batteries
Physical
Pack Quantity 1
Form Factor Amplifier
Show More
Reviews

Submit Product Review

In order for you to submit a review you need to be logged into an account.

Review Snapshot

5
4
3
2
1
0.5

No reviews for this product