|
By using latest low-impedance digital amplifier chip technology the new Techconnect Amp module outputs a massive 2 x 25 watts RMS (at 8 ohms) but fits into the space of a Techconnect module. Two Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This 'half-normalled' input disconnects the rear terminal while in use. Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary. Don't let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers). By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on - for example in hotel guest rooms. A simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input. A remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision's spare remote controls have tone buttons but they do not work with this product. A robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required. Speaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect. Ideal when you don't have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft. Can be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms. Included is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules. Vision's SP-1800 professional wall mounted loudspeakers are super-easy to install, look beautiful, and produce rich and powerful sound. They are 240mm tall and use a 5.25 inch woofer - the most popular size for classroom, meeting room, and boardroom applications. These loudspeakers use three drivers; a woofer, a tweeter, and a piezo tweeter. Asking a driver to produce a wide range of frequencies is always a compromise, so dividing the sonic range into three means each driver has a narrower range of frequencies to produce, resulting in less distortion and clearer sound. A bass reflex port allows greater excursion of the woofer, which allows the woofer to produce lower frequencies, and the delayed movement of air from behind the woofer to the front reinforces the bass even more. A metal grille protects the drivers from physical interference. Constructed with tough ABS plastic, the finish withstands the rigors of the professional use. In small to medium presentation environments a wide dispersion is generally more important than microphone feedback management, so no horns are used. The adjustable brackets allow the installer to easily angle up 30º or down 30º. Or leave the brackets off and use as shelf speakers.
|